Capture Fine Details Easy Demold Good Flowability RTV-2 Silicone Liquid Rubber For Resin Castings
Liquid Silicone Rubber for Soap Mold Making is a two-component material, which consists of Part A base silicone and Part B CA30 curing agent; then the silicone base and curing agent can cure at room temperature by a condensation reaction.
These materials can be cast into the cured silicone mold: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc
1. Good flow ability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
Technical parameter of silicone rubber for candles moulds
| Item | Color | Hardness | Suitable | Method | Patterns for casting | Some Applications |
| MCSIL2010 | white | 10 shore A | small and detailed mold | pouring and brushing way | PU, resin, concrete,sculpture , architectural elements ,plaster , cements ,gypsum ,polyester,epoxy, polyurethane, wax | candle and soap mold making , sculptures , gifts and crafts production , decorations articles , pu foam , prototypes, household furnitures . |
| MCSIL2015 | white | 15 shore A | small and detailed mold |
| MCSIL2020 | white | 20 shore A | small or middle sized |
| MCSIL2024 | white | 24 shore A | small or middle sized |
| MCSIL2025 | white | 25 shore A | middle or big sized
|
Step One : Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two : Vacuum pumping . Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated .
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
The Silicone Rubber for Candle Mold Making is stored at or below 30 °C(85 °F) in the original unopened containers .
After 12 months,please use a stirring mill to stir the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
12 months from date of production when stored at 25°C in the original sealed packages.
1. Packed with vacuumed thick PE bag inside, and iron barrel (tin) outside,packing in 5kg,20kg,25kg,200kg.
2. The product should be stored in a cool dry place, avoid the sun and rain,it must be kept away from acids, alkalis, salts and other compound.
Benefits of MC Silicone
Ease of processing
High resin resistance increasing the number of cast parts
Low linear shrinkage for greater accuracy
Easy release of shapes, including large pieces and complex geometries
High compatibility with water-rich casting materials such as gypsum
Increased compatibility with high performance concrete
Dimensional stability due to very low shrinkage
High mechanical properties over a range of flexibility
Product Tags:
|
|
25 Shore Resin Castings RTV2 Silicone Mold Rubber Easy Demold Good Flowability Images
|
